1 Installation, Operation and Maintenance 7658A Detonation Flame Arrester IOM 7658A.0 May 2015
2 Table of Contents Section Page Introduction 1 Specifications 1 Test Results 1 Design & Function 2 Installation 2 Maintenance 3 Model Identific
3 The flame arresters consist of two main components, the arrester bases and the flame element housing assembly. The bases serve as the connecting
4 The following guidelines should be observed at installation: 1. Remove any flange protectors and discard all packing material. 2. Inspect the gas
5 attachment to the housing handles, or lifting eyes, and proceed as follows. WARNING The lifting eyes on the element housing are to be used for hand
6 The table below is a partial list of vapors for which the MESG has been measured and found to be greater than or equal to 0.036" [0.92 mm]. I
Kommentare zu diesen Handbüchern